Jumper Cables Adapter with Alligator Clips, Compatible with 20V Battery, 2FT 8AWG Portable Battery Jump Starter Automotive Booster Cables Power for Jump Starting Tool

Selling point:1. [Operation Instructions] ① Clamp the red clamp onto the positive pole (+) of the car battery, insert the tool battery into the adapter and ensure it is securely fastened, then clamp the black clamp onto the negative pole of the battery; ② Turn the power key or press the start button to start the vehicle, and the duration of a single ignition should not exceed 2 seconds; ③ If the first startup fails, do not retry immediately. Let the tool battery recharge the car battery for a few minutes before attempting again;④ After the vehicle is successfully started, immediately remove the tool battery.2. [Important precautions] ① Please strictly control the duration of a single ignition of the car within 1-2 seconds. Long term high current discharge may cause damage to the tool battery;② The larger the capacity of the tool battery, the stronger the output starting current, which can be adapted to start vehicles with larger displacement; ③ Not recommended for starting large displacement engines, as the tool battery cannot withstand the excessive current required for starting such engines; ④ This power line has no voltage conversion or voltage reduction function, and only provides a backup solution for emergency vehicle start-up.3. [Specifications] Wire: 8-AWG specification, length 2 feet - Adapter: Compatible with 20V cordless tool batteries - Compatible with the vast majority of motorcycles, cars SUV. Can start 5.0L and below gasoline engines, 3.0L and below enginesProduct material: Oxygen free copperThe package includes:1 * Jumper cable clamp

• Built Tough & Safe: Our adapter is made of robust ABS plastic with a convenient, slip-resistant design. It features high-quality pure copper wire cores for excellent conductivity and flexibility. The cables are covered with fire-resistant PVC insulation, and the clamps are made with fully-insulated materials to prevent sparking.
• Optimal Power Delivery: Equipped with pure copper forged wires and clamps (8AWG tinned copper conductor, silicone sheath) ensuring superior conductivity for reliable power transmission to start your vehicle efficiently.
• Instructions For Use: a. Connect the red battery clamp of the jumper cable to the positive terminal (+) of the vehicle, and the black clamp to the negative terminal (-). B. Insert the battery into the adapter and ensure it is securely locked. C. Attempt to start the car. D. Disconnect the connection between the car battery and your tool battery after successfully starting the car.
• Important Notes: Always verify your vehicle's voltage compatibility first; Safely jump-start vehicles including cars, trucks, suvs, and rvs; Never reverse connection sequence; remove within 30 seconds of engine start (risk of fire/explosion); This jump starter does not convert voltage & check power level before use.
• Specifications: 8-AWG 2FT wire- Adapter: Compatible with DeWei's full range of 20V cordless tool batteries - Compatible with the vast majority of motorcycles, cars SUV. Can start 5.0L and below gasoline engines, 3.0L and below engines